34
Various Settings
Using the AREA SHOT mode
By manually switching between guidance points,
both previous and next guidance points can be
confirmed during guidance. Intersection street
names and the direction of turns are shown on
the display in text and with arrows.
Switching between guidance points
After passing each location described in the
guidance, it is necessary to switch manually
to the next guidance screen. The previous
screen can also be accessed manually and
confirmed.
[ ] button:
Switches to the next guidance point.
[ ] button:
Switches to the previous guidance
point.
Re-scrolling through text
information
Text information including intersection street
names and turn directions can be scrolled
across the screen. A maximum of 9
characters can be displayed on a single
screen. Excess characters are scrolled on the
display. When scrolling is complete, the first
nine characters are once more displayed on
the screen. To re-scroll perform the following
operation:
Guidance information can be re-
scrolled.
Changing AREA SHOT screens
In the AREA SHOT mode, the audio screen
can be accessed.
Pressing the button repeatedly allows
you to switch back and forth between
the AREA SHOT screen and the Audio
screen.
CAUTION
• Modes may not be changed if guidance
data has not been imported properly.
• Do not look at the screen while driving.
1
Press the [ ] or [ ] button to
switch between guidance points.
1
Press the [DISP] button.
1
Press the [RTN] button.
● Note ●
• The distance between a
previous and next turn
intersections is displayed on
the screen in miles (“mi”) for
US model and in kilometers
(“km”) for Australia model.
To Next Page
Loading...
Need help?
General
