Eclipse CD3434 - Disabling the Cross over (F,R) Function

35
Basic operation
Here, the HPF (high-pass filter) to the front and rear pre-outs
can be switched ON and OFF.
Since the high-pass filter passes only higher ranges (lower
ranges are cut off), efficient playback is enabled by cutting off
lower-range elements not needed for the mid to higher range
speaker.
Turn [SEL] button to select X-OVER FR.
Press the [SEL] button.
The cross over (front/rear) switching mode is activated.
Turn [SEL] button to select ON or OFF.
Press the [RTN] button.
At this time, other adjustments can also be made in sound
adjustment mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
5
4
3
2
1
Disabling the Cross Over (F,R) function
[SOUND] button
[SEL]
button
[RTN] button