Eclipse CD3434 - Selecting a Station (Manually or Automatically); Selecting Preset Stations; How to Play Cds; Switching Disc Mode

60
How to use the Card remote control
[BAND] button
[ PRESET CH ] buttons
[ TUNE•SEEK ] buttons
Selecting a station (manually or automatically)
Press the [ TUNE•SEEK ] button.
[ ] button: Tunes to higher frequency stations.
[ ] button: Tunes to lower frequency stations.
1
A short press of the button will allow manual station tuning.
Pressing for more than one second will start automatic tuning.
Selecting preset stations
Press the [ PRESET CH ] button.
[ ] button: Select the next higher number preset button.
[ ] button: Select the next lower number preset button.
1
Switching disc modes
Press the [BAND] button.
When one or two CD changers are connected, press the
[BAND] button to change modes from CD player ➔ CD
changer 1 ➔ CD changer 2.
The indicator will skip a changer or player that has no discs
loaded.
1
A total of six stations may be selected (preset tuning) out of
those already set in memory through the main unit. (Refer to
“Manually setting stations into memory,” page 52.)
How to play CDs
Select the disc mode first.