Do you have a question about the Eclipse P400 and is the answer not in the manual?
Type | Mid Tower |
---|---|
Dimensions | 210mm x 465mm x 470mm |
Motherboard Support | ATX, Micro-ATX, Mini-ITX |
Expansion Slots | 7 |
Cooling Support | Front: 3x 120mm or 2x 140mm, Top: 2x 120mm or 2x 140mm, Rear: 1x 120mm |
Pre-installed Fans | 1x 120mm Rear |
Maximum GPU Length | 395mm |
Maximum CPU Cooler Height | 160mm |
Maximum PSU Length | 270mm |
Front Radiator Support | Up to 360mm |
Rear Radiator Support | 120mm |
Material | Steel |
Drive Bays | 2 x 2.5", 2 x 3.5" |
Front I/O Ports | 2x USB 3.0, Audio In/Out |
Details physical dimensions and materials of the computer case.
Specifies radiator support for liquid cooling systems.
Lists maximum component sizes for CPU cooler, GPU, and PSU.
Details internal drive bay configurations for storage.
Outlines fan mounting options and sizes for cooling.
Explains how to operate the RGB LED lighting control feature.
Details internal wiring for audio, panel, USB, and LED components.
Explains the fan control system available on specific models.
Instructions for removing the case's side panels using captive thumbscrews.
Guide on how to correctly install the motherboard onto the chassis standoffs.
Instructions for securing the power supply unit (PSU) within the case.
Explains how to remove and clean dust filters from the case.
Details the supported fan sizes for different case locations.
Step-by-step guide for installing 3.5-inch hard drives into the case.
Instructions for installing 2.5-inch SSDs or small form factor drives.
Procedure for removing the hard drive bracket from the chassis.
Guide for installing SSDs using the Drop-N-Lock bracket system.
Lists compatible radiator sizes for different mounting locations.
Specific compatibility details for 120mm form factor radiators.
Specific compatibility details for 140mm form factor radiators.
Instructions for installing an optional 3.5-inch HDD modular bracket.
Guide for installing the PWM fan hub for fan control.