ENGLISH
Translation of the original German user manual 19
3.2 Switches and lights
1. Light “machine in use“
2. On/Off button
3. Light “heating“
4. Steam switch
5. Light “coffee button On/Off“
6. Coffee button
7. Light “pump/hot water On/Off“
8. Pump/hot water switch
3.3 Technical data
Voltages: EU: 230 V
UK: 230 V
Australia: 240 V
US: 110 V
Japan: 100 V
Frequency: EU: 50 Hz
UK: 50 Hz
Australia: 50 Hz
US: 60 Hz
Japan: 50/ 60 Hz
Power: 1.200 W
Water tank: approx. 2.8 litres
Measurements: W x D x H / 210 mm x 370 mm x 380 mm
Measurements with portafilter: W x D x H / 210 mm x 410 mm x 380 mm
Weight: 14.0 kg
4 MACHINE INSTALLATION
4.1 Preparation for installation
• Place the machine on an even, water-resistant and stable surface.
• Never place the machine on hot surfaces.
4.2 Electrical connection
• Make sure that the local main voltage supply corresponds to the information given on
the type plate on the front panel of the espresso machine.
• Make sure that you use the correct power plug for your country.
• Plug the machine into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use an extension cord / do not use a multiple socket.
5 FIRST USE
Read the instruction manual carefully prior to operating the machine.
Prior to starting the machine, check if:
• the steam/hot water valve is closed.
• the switch and buttons are not activated.
• the power cord is disconnected.
• the drip tray is inserted accurately.
• the machine is placed on a water resistant surface.
To Next Page
Loading...
