ECM Giotto - Introduction; Instruction for Use

User’s manual Giotto 4
2. Introduction
Please read this technical handbook carefully since it provides important information on the
correct installation, use and maintenance of your ECM coffee machine.
The information contained in this manual is necessary for the safe installation and operation of your
ECM coffee machine. It should be retained in a safe place for future reference. Copies are available
from your local ECM dealer.
The information contained in this manual relating to installation and operation is not a substitute for
safety instructions and technical data affixed to the machine and/or its packaging.
The manual provides information that is current at the time of publication. The information is
subject to amendment or alteration without notice.
Your ECM machine should only be operated in accordance with instructions contained in this
manual and verbal instructions and training provided by an authorised ECM dealer.
Installation and maintenance should only be carried out by technicians and service providers
authorised by ECM.
ECM accepts no liability for injury and damage to person, persons or property caused by incorrect
installation, misuse, operator negligence, neglect of the machine or any other circumstances beyond
its control.
3. Instruction for use
This machine has been designed for the sole purpose of producing coffee, hot water and steam for
hot beverages.
All other uses are outside of the scope of this machine and, therefore, dangerous and hazardous.
The machine has been designed from safe, accessible, durable components and materials and
manufactured to the highest standards for use only in a professional catering environment.
The machine should not be exposed to elements such as sunlight, rain, snow, extreme temperatures
etc.
The machine must be operated by professional trained adult personnel and should not be used by
children, minors or untrained staff.
The operator should be fully conversant with safety operating procedures contained in the manual
and should follow the training instructions and advice provided by a qualified technician during the
installation procedure.