E C O P H Y S I C S Introduction
CLD 780 TR / July 2000 7
1.2.5 General safety rules
Legally-binding regulations
In addition to the instructions in this manual, all current environmental,
safety and technical regulations must be respected.
General inspection requirements
To be met after each maintenance, repair or service operation.
Power connections
The analyzer may only be installed and connected to the mains power-
supply according to the installation guide in section 4.2 of this manual. All
power lines must be switched to cut off the electrical supply at source.
Accessories and spare parts
For maintenance and repair the options and spare parts originally manu-
factured by ECO PHYSICS and included in this manual should be used
exclusively.
Modifications and alterations
Modifications of the analyzer or options and parts, which affect safety
aspects, are only permissible with the written consent and prior agreement
of ECO PHYSICS AG.
To Next Page