E C O P H Y S I C S Introduction
CLD 780 TR / July 2000 8
1.2.6 Responsibilities and duties of the supplier
The supplier is responsible for the safety of the product; this can only be
guaranteed if the end user undertakes to follow fully the requirements and
suggestions contained in this handbook. The end-user has a duty of care
to ensure that this is done.
The supplier observes his product beyond the time of delivery. He is enti-
tled to request information especially related to safety from the end user.
Duties of the end user: Training, personnel competence
The end user makes sure that only trained and authorized personnel can
work with the analyzer. He is responsible for comprehensive training fol-
lowing the instructions of this manual. He designates the responsible per-
sons and delegates competencies.
Instruction on the dangers to personnel
The end user makes sure, that his personnel install and operates this ana-
lyzer only in compliance with this manual. He is responsible for the neces-
sary supply of safety-relevant tools and support materials.
Duty of care and maintenance
The analyzer must be maintained in operational condition; full periodic
maintenance shall be performed.
Duty to observe and inform
In case of any (remaining) risks or dangers, which have not been covered
in this manual, the end user of the analyzer is requested to inform the
supplier immediately.
To Next Page
Loading...