What to do if there's water on the floor near my Ecoair ECO DD122FW SIMPLE?
If you find water on the floor near your Ecoair Dehumidifier, check that the unit is on a level surface, ensuring it's not resting on a cable or uneven ground. Also, inspect the drainage hose and its connection to ensure they are properly connected and not clogged.
What to do if the 'Full/Check' lamp lights on my Ecoair Dehumidifier?
The 'Full/Check' lamp might light up on your Ecoair Dehumidifier for several reasons. First, ensure the bucket is empty and correctly placed, checking the float's position. Second, make sure the unit is on a stable, level surface. Also, verify that the air inlet and outlet are free from obstructions, and clean the filter. Insufficient ventilation or high ambient temperatures (over 35ºC) can also trigger the light. If this is the case, move the unit to a cooler place and wait at least 30 minutes before resuming operation. The unit has a safety feature to prevent overheating.
Why won't my Ecoair ECO DD122FW SIMPLE Dehumidifier start (no lamp)?
If your Ecoair Dehumidifier isn’t starting and the lamp is off, there are a few things to check: First, ensure the unit is properly plugged into the outlet. Next, inspect your house's fuse or circuit breaker box, and replace the fuse or reset the breaker if necessary. Finally, if the room humidity has reached the set level on the humidistat, try turning the humidistat clockwise to a drier setting, which should activate the unit.
Controls humidity level by turning the dial. Sets unit on/off automatically.
Selects fan speed and heating power for operation.
Explains the Power On and Full/Check indicator lights.
Details the Economy, Medium, and Hi settings for humidity control.
Describes the continuous operation mode for drying clothes.
Explains Normal and Quick modes for energy saving or rapid dehumidifying.
Explains causes for the Full/Check light, like full bucket or filter needs cleaning.
Instructions for cleaning the nano-silver filter using a vacuum cleaner.
Steps for cleaning the exterior of the dehumidifier with a damp cloth.
Guidance on preparing the unit for storage, including cleaning and placement.
Addresses issues where the unit fails to power on or show any lamps.
Explains reasons for the Full/Check indicator, such as full bucket, blocked inlets, or temperature.
Covers causes for water leakage, including uneven placement or drainage issues.
Explains that a smell is normal due to the Zeolite material absorbing and releasing odors.
Discusses variations in water collection based on room humidity levels.
Describes the unit's automatic shutdown for cooling as a safety feature.
Emphasizes the need for proper ventilation and avoiding heat sources for optimal operation.
Explains how the Silver Ion technology kills bacteria and controls microbes effectively.
Provides tips and steps for cleaning the filter, recommending vacuuming only.
Details the warranty period, coverage conditions, and voiding factors.
General| Type | Desiccant |
|---|---|
| Tank Capacity | 2 Litres |
| Features | Continuous drainage option |
| Operating Temperature | 1 - 35 °C |
| Filter Type | Washable filter |
| Water Extraction Rate | 7 Litres/Day |
To Next Page