Need help?Do you have a question about the Ecobee Switch+ and is the answer not in the manual?
General| Type | Smart Light Switch |
|---|---|
| Connectivity | Wi-Fi |
| Voltage | 120V |
| Amperage | 15A |
| Wattage | 1800W |
| Load Capacity | 600W incandescent, 150W LED/CFL |
| Color | White |
| Voice Control | Amazon Alexa |
| Compatibility | Amazon Alexa, Google Assistant |
| Sensors | Occupancy |
| Wireless Protocol | Wi-Fi 802.11 b/g/n |
Installation involves handling high voltage wiring; follow all instructions carefully.
To avoid fire or death, turn off circuit breakers and follow safety precautions.
Download the ecobee app, install Switch+, and register to unlock smart features.
Find videos, diagrams, and guided tours for registration and smart features.
Turn off power for installation; recommend starting during daylight hours.
Lists wall plate, ecobee Switch+, wire nuts, and mounting screws.
Lists Phillips head screwdriver, flat head screwdriver, and optional pliers.
ecobee Switch+ can only be installed where a single switch controls the light.
Verify the presence of at least one neutral wire (typically white).
Details voltage, AC frequency, and wattage ratings for incandescent and LED/CFL loads.
Turn off the specific circuit breaker or the master power if unlabeled.
Verify power is off by testing the wall switch multiple times.
Unscrew the wall plate and switch from the wall.
Disconnect wires by turning wire nuts counterclockwise.
Paint may require more force to unmount the switch.
Identify line/load (black/red), ground (copper/green), and neutral (white) wires.
Neutral wires (white, often in a pair) are needed for installation.
Connect Switch+ neutral wire to the two neutral wires from the wall box.
Match and secure remaining wires (switch, line, load, ground) with wire nuts.
Refer to the next page for instructions on how to use a wire nut.
Wire nuts connect two or more wires securely.
Align wire ends, insert into nut, twist clockwise until secure; double-check connection.
Pliers can help twist wires together before inserting and straighten curved wires.
Push each wire nut one at a time, as close to the back of the wall box as possible.
Use provided screws to mount the ecobee Switch+, ensuring it's level and flush.
Turn on the circuit breaker that controls the newly installed switch.
Test by turning the Switch+ on and off; snap on the wall plate if it powers on.
If no power, turn off breaker, recheck wire connections, and test again.
Call ecobee customer support at 1-877-932-6233 if issues persist.
Register device, connect to Wi-Fi, and unlock smart features via the ecobee app.
Use the ecobee app on iOS and refer to manual code for HomeKit connection.
Details mic off, action, on/off buttons, light bar, speaker, occupancy sensor, and night light.
Lights turn on automatically when entering a dark room.
Use voice commands for lights, timers, news, music, and more.
Automate lighting at sunset and off when chosen; lights turn off when room is empty.
Enable night light setting in the app for low-light visibility.
Hold button for 5s to access reset Wi-Fi, HomeKit, restart, or factory settings.
Contact ecobee.com, support@ecobee.com, or 1-877-932-6233 for assistance.
Equipment tested for Class B digital device limits; may cause interference if not used properly.
Complies with FCC radiation exposure limits; maintain 8 inches proximity to antenna.
Complies with IC RSS standards; subject to interference acceptance.
Transmitter must be installed with 8-inch separation from persons.
Lists FCC ID, IC ID, and notes product designed in Canada, assembled in China.
Covers defects in materials/workmanship for one year; repair or replacement provided.
Excludes issues from improper use, modification, damage, or installation.
Apple not liable for device operation; accessory use may affect wireless performance.
Contains the QR code and numerical code for HomeKit setup.
To Next Page