To Next PageTo Next Page
Need help?Do you have a question about the Ecodyne Water Systems IDP30S and is the answer not in the manual?
General safety precautions and installation warnings for proper operation.
Performance data for Barium, Radium, and Chloramines reduction.
Criteria for selecting the optimal location for the water softener unit.
List of necessary tools, pipes, fittings, and materials for installation.
Visual guide for single and 3-valve bypass installation methods.
Illustration detailing the correct method for connecting the drain hose.
Steps for turning off water, installing bypass, and making plumbing connections.
Procedures for grounding, drain hose, brine tank assembly, and overflow hose installation.
Connecting brine tubing and performing pressure tests for leaks.
Instructions for filling the brine tank with water and salt.
Steps to sanitize the unit to prevent bacterial contamination.
Procedure for restarting the water heater after softener installation.
Initial configuration of language, system units, and current time.
Explanation of normal operation display screens and their meanings.
Information on messages, alerts, reminders, and error indications.
Navigating menus for recharge, salt, basic, user, system, and advanced settings.
Enabling or disabling the lockout feature to prevent parameter changes.
Programming salt level, low salt alarm, and salt type selection.
Initiating a manual recharge and setting the current time.
Adjusting recharge time, water hardness, and iron levels.
Enabling or disabling status screens displayed during normal operation.
Setting the display language and other user preference options.
Configuring time format, volume units, hardness units, and weight units.
Viewing model, water usage, flow rate, and operational data.
Configuring backwash, second backwash, and fast rinse times.
Adjusting efficiency mode, recharge intervals, and the 97% feature.
Setting up auxiliary outputs and chemical feed pump parameters.
Setting service reminders and understanding the wiring schematic.
Accessing diagnostic data and managing setup configurations or defaults.
Adding salt, recommended types, and how to break salt bridges.
Procedures for cleaning the nozzle, venturi, and resin bed.
Basic checks for common problems like no soft water or error codes.
Using electronic diagnostics and checking turbine function for flow issues.
Checking valve positions and flow during recharge cycles.
Addressing issues like hard water bypass and water leaks.
Diagram showing all major components of the softener unit.
General| Brand | Ecodyne Water Systems |
|---|---|
| Model | IDP30S |
| Category | Water Dispenser |
| Language | English |
