To Next PageTo Next Page
Need help?Do you have a question about the Ecodyne Water Systems IDP50CC and is the answer not in the manual?
Steps for pressure testing, programming the controller, and rinsing.
How to enable or disable the lockout feature to prevent parameter changes.
Instructions for setting the salt level after adding salt.
How to initiate a manual recharge for the water softener.
How to adjust various cycle times like backwash and rinse.
How to configure special features like efficiency mode and service reminders.
How to configure the auxiliary output for external devices.
How to set or reset the service reminder notification.
How to check the operating state of softener components.
How to set volume and timer for chemical feed pumps.
How to redo setup or restore softener default settings.
Instructions and recommendations for adding salt to the brine tank.
Steps for cleaning the nozzle and venturi for proper operation.
Basic checks to perform when troubleshooting issues.
How the softener's self-diagnostic system works and displays errors.
How to manually advance the valve through cycles for testing.
How to view detailed diagnostic information about softener components.
Procedure to check the turbine for proper water flow indication.
General| Brand | Ecodyne Water Systems |
|---|---|
| Model | IDP50CC |
| Category | Water Dispenser |
| Type | Bottled Water Dispenser |
| Capacity | 5-gallon bottle |
| Dispensing Options | Hot and cold water |
