ECT Install and User Guide
Feb 2023
47 of 61
ECOER INC.
Manufacturer reserves the right to change specifications or designs without notice.
When the air conditioning unit is off, into the query
function of temperature, press“ ”or “ ”to select rEC.
ON or OF will be displayed in the temperature area to
indicate whether it is valid or invalid.
When the selection is invalid, the wire controller does not
process any remote control signals.
Press “Confirm” into setting state, press“ ”or “ ”to
select , then press “Confirm” to complete it.
When the air conditioning unit is off, into the query function
of temperature, press“ ”or“ ”to select tHI or tLo.
Press “Confirm” into setting state, press“ ”or “ ”to
select the temperature, then press “Confirm” to complete it.
The highest setting temperature range : 25~30°C
The lowest setting temperature range: 17 ~24°C.
Set the highest and lowest temperature values
: Highest value setting function.
: Minimum value setting function.
Remote control function selection of wire controller
To Next Page
Loading...
