ECT Install and User Guide
Feb 2023
48 of 61
ECOER INC.
Manufacturer reserves the right to change specifications or designs without notice.
When the air conditioning unit is off, into the query
function of temperature, press“ ”or “ ”to select INIt, the
temperature zone displayed --.
Press “Confirm” into setting state, press“ ”or “ ”to
select to "ON" , then press “Confirm” to complete it.
When the air conditioning unit is off, into the query
function of temperature, press“ ”or “ ”to select Adr,
the temperature zone will display -- or A, B. Where -- refers
to the code setting of the wire controller.
Press “Confirm” into setting state, press“ ”or “ ”to
select , then press “Confirm” to complete it.
Two - line controller address selection
-- : The code setting of the wire controller shall prevail.
-- : The wire controller address setting.
Restore factory Settings
: Restore factory Settings .
To Next Page
Loading...
