ECT Install and User Guide
Feb 2023
49 of 61
ECOER INC.
Manufacturer reserves the right to change specifications or designs without notice.
After the wire controller resumes the factory parameter setting, the
rotating parameter setting is restored to 10 hours (the highest and
lowest temperature are not set); The compensation of body
temperature is uncompensated; COOL and HEAT/single COOL mode is
restored to COOL and HEAT model;
Restore the temperature range to the factory setting. Remote
receiving function is restored to be effective;
The address of the two-control first-line controller is restored to the
code switch.
To Next Page
Loading...
