Date/Time
This is used to adjust the day of the week, date (DD/MM/YY) and time (HH:MM 24-hour
format) of the controller.
Daily saving time
The settings of automatic time change between seasons (autumn-winter / spring-summer)
can be adjusted.
Night-time
This is used to set up a daily time period when the maximum speed of the compressor or
unit heater is limited. This function is especially useful to reduce noise emissions at night.
DHW Schedule / Heating Schedule / Cooling Schedule / Pool Schedule / BC Schedule
This allows programming up to 4 time periods for each day of the week.
Independent time schedules can be set up for DHW, HEATING, COOLING AND POOL
services. A complete time schedule can also be set up to switch the heat pump on / off.
Holiday calendar
This can be used to program up to 3 periods a year when the heat pump stays on or off.
Heating
This enables the HEATING mode and adjusts the heating cut-off temperature. The HEATING
mode is never activated for temperatures over the cut-off setpoint.
The icon indicates that there is a time schedule activated in the HEATING mode.
Heating buffer
This shows the setpoint temperature of the buffer storage tank and allows adjustments to
be made to the start-up temperature differential.