Ecolab MU421-P - 3. Unit Operating Modes; Power On and Initial Setup; Standby Mode Operation

6
110007941
Software Manual
3. Modes
3.1 Power On
Theveryrsttimetheunitisswitchedon,werecommendsettingdateandtimeintheSetup
menu,settings,displayEP.Ifdateandtimeisnotset,dateandtimewillcountfromthepre-set
default date and time.
2006-01-01 12:00
Date & time
EP
Set date and time using navigation buttons.
Set date & time
2006-01-01 12:00
ConrmbypressingOKbutton.
3.2 Standby
The start up display will look as the one below.
Display for SB model with High- and Low pressure - Select either HP or LP using arrows up & down.
ECOLAB
Pegasus 12:00:00