EcoSmart Fire BK5 - Regular Safety Checks

To Next Page

To Previous Page

Regular Safety Checks

Like all re and replace systems, it’s important to run through

regular safety checks. Please take the time to familiarise yourself

(and any other users) with the safety procedures associated with

using your EcoSmart Fire.

e-NRG bioethanol is the ONLY fuel suitable for use in this

appliance.

Check your burner is in good working condition, the shut o

mechanism is working smoothly, the lling point is accessible and

eective, nothing foreign has fallen into it and make sure there is

no visual or physical damage to the burner

Frequently inspect all around the installation – including lifting the

burner out of its position to ensure that no fuel has accumulated

in or around the setting at any time

Take out your operations manual and refresh your memory on the

operational procedures for using this product – it’s available on

our website too

Give your burner a good clean, they can be washed out with hot

soapy water and left to dry - or pop it in your dishwasher on the

hot pan cycle with detergent (refer to your Operations Manual)

Check the operation of your Jerry Can, re extinguisher, lighter

and lighting rod to ensure you have the right tools to use for

safely operating your re - replacement accessories are available

from your closest distributor

Check your fuel supply is stored according to regulations – if you

are unsure contact your local distributor

Check that all ammable items are within safe distance from the

ame – that’s a minimum of 1500mm [59.1in] at all times in all

conditions

And remember, never overll your burner, never ll your burner

whilst it is in operation or hot, never leave a re unguarded and

never leave children unsupervised