20
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2024
INSTALLATION AND OPERATION GUIDELINES FOR REVERSE OSMOSIS SYSTEMS ECOSOFT ROBUST MINI,
ROBUST 1500, ROBUST PRO, ROBUST 3000, ROBUST 3000MAX, ROBUST 4000
Tube from the pure water outlet to the ultraviolet unit.
In the product RObust Mini Tube from the outlet with a blue cap to the ultraviolet unit.
In the Robust4000 product, a tube from the "Puried water" outlet for connecon to the ultraviolet unit.
Use ROBUSTKIT to connect the pressure tank
and addional equipment.
Tube from the drain outlet to the drain saddle.
In the product RObust Mini Tube from the outlet with
a black cap to the drain saddle.
Water supply tube from the water main.
In the product RObust Mini Tube from the outlet with a red cap to the outlet of the water main
The tube from the UV unit outlet to the puried water faucet.
*UV unit — oponal equipment, not included in the delivery.
Check that feed water meets requirements in p. 2.2.
If the water quality does not meet requirements, refer to a water treatment specialist company
for assistance selecng the appropriate water ltraon product for normalizing feed water quality.
Before proceeding with the installaon, ensure there is enough space for the assembled system. If
using pressure tank, provide room for it as well. In case of shortage of space, pressure tank can be
removed to the distance of connecng tube length.
Install the reverse osmosis system in accordance with below procedure.
CAUTION!
Puried water
Drainage Tank Inlet
To Next Page
Loading...
Need help?
General
