To Next PageTo Next Page
Need help?Do you have a question about the Ecotec Amalfi and is the answer not in the manual?
General| Brand | Ecotec |
|---|---|
| Model | Amalfi |
| Category | Pellet stove |
| Language | English |
Details about the heater's technical specifications, including voltage, power, and efficiency.
Presents dimensional drawings and measurements of the pellet heater.
Guidance on selecting an appropriate and safe location for the pellet heater.
Prohibits the use of flammable liquids for starting or maintaining the fire.
Details mandatory requirements for professional installation and compliance with regulations.
Brief overview of automated operation and general operating guidelines.
Explains the function of each button and control on the stove's interface.
Step-by-step guide for safely switching on the pellet stove.
Guide to programming daily ON/OFF times for automated heating cycles.
Explains how to set and modify the room temperature for heating control.
Instructions for modifying the desired boiler water temperature setting.
How to check the operational status of key stove components.
Explains the working hours display and its potential non-zero initial values.
Details the various symbols and display messages shown on the stove's control panel.
Provides a visual guide to the different elements displayed on the screen.
Explains the meaning of various icons and symbols used on the display.
Lists common alarm warnings, their reasons, and recommended solutions.
Presents the wiring diagram for the pellet stove's electrical components.
Instructions for cleaning the exterior painted surfaces of the stove.
Guidance on cleaning the fire pot before and after each use for optimal combustion.
Details the regular cleaning tasks to be performed every two to three days.
Provides a table detailing the recommended cleaning frequency for various stove components.
Information on obtaining and completing the guarantee certificate.
Outlines the terms and conditions of the product's limited guarantee.
Guidance on selecting an appropriate and safe location for the pellet heater.
Specifies minimum clearances required between the stove and combustible materials.
Specifies required locations and clearances for exhaust and fresh air intake systems.
Lists mandatory safety devices for closed expansion tank systems.
Presents dimensional drawings and specifications for the Amalfi Freestanding model.
Details minimum clearances and general specifications tested to AS/NZS2918:2001.
Lists precise minimum distances required from the stove to combustible surfaces.
Reiterates the need for experienced installers and thorough manual review.
Emphasizes hermetic sealing of the gas outlet system and proper flue construction.
Details the components and application of the internal standard flue kit.
Describes the components and usage of the external standard flue kit for wall penetration.
Details safety devices and recommendations for connecting the hydraulic plant.
Details requirements for securing the stove to prevent movement during seismic events.
Specifies methods for securely fixing the stove to timber floor joists.
Step-by-step instructions for safely removing the side panels of the stove.
Illustrates the specific points on the stove where seismic restraints should be attached.
