12
EN
Spot Cleaning Mode
Edge Cleaning Mode
This mode is applicable for an area of highly concentrated dirt or dust. In Spot Cleaning Mode, DEEBOT 7
focuses on a specic area to clean.
This mode is good for cleaning the edges and corners of a room. In Edge Cleaning Mode, DEEBOT 7
cleans along a border (e.g. wall).
3. Operating and Programming
Intensive Cleaning Mode
This mode is good for aggressive cleaning or for extremely dirty or dusty oors. In this mode, DEEBOT 7
is more sensitive to dirt and dust and performs a more thorough cleaning. In this mode, DEEBOT 7 follows
the same cleaning pattern as Automatic Cleaning Mode, but performs a more thorough cleaning.
2
3
4
To Next Page
Loading...
