22
EN
NO. Malfunction Possible Causes Solutions
5
Remote Control
failure (effective
control range of
Remote Control
is 5m (16')).
The batteries in the Remote
Control need to be replaced.
Replace with new batteries making sure
they are installed correctly.
The Bottom Power Switch is
turned OFF, or DEEBOT 7’s
battery is low.
Make sure DEEBOT 7’s Bottom Power
Switch is ON and fully charged.
The infrared signal cannot
be transmitted because the
Infrared Emitter on the Remote
Control or DEEBOT 7’s Infrared
Receiver on
DEEBOT 7
is dirty.
Use a dry cloth or the Multi-Function
Cleaning Tool to wipe the Infrared Emitter
on Remote Control and the Infrared
Receiver on DEEBOT 7.
There is other equipment
interfering with the infrared
signal to DEEBOT 7.
Avoid using the Remote Control near other
equipment using infrared signals.
5. Troubleshooting
To Next Page
Loading...
