10
EN
Charging DEEBOT
1
Auto-Empty Station Placement
2
Power ON
Note: I = ON, O = OFF.
DEEBOT cannot be charged
when being powered OFF.
6.5
3
Charge DEEBOT
Empty remaining water from
the Reservoir and remove the
Reservoir and the mopping pad
plate before charging DEEBOT.
ashes when DEEBOT is
charging. goes out when
DEEBOT is fully charged.
ECOVACS HOME
ECOVACS HOME App
To enjoy all available features, it is recommended to control your
DEEBOT via the ECOVACS HOME app.
Wi-Fi Indicator Light
Before you start, make sure that:
Tips: If you have any problems during the Wi-Fi setup process, refer
to the Troubleshooting > Wi-Fi Connection section in this manual.
• Your mobile phone is connected to a Wi-Fi network.
• The 2.4GHz band wireless signal is enabled on your router.
• The Wi-Fi indicator light on DEEBOT is slowly ashing.
Slowly flashing
Disconnected to Wi-Fi or
waiting for Wi-Fi connection
Rapidly flashing Connecting to Wi-Fi
Solid Connected to Wi-Fi
To Next Page
Loading...
