17
EN
1
3. Operating and Programming/3.5 Operating DEEBOT
During the rst cleaning, please supervise DEEBOT and assist it should there be a problem.
Pressing for 3 seconds to send DEEBOT back to the Auto-Empty
Station.
Start
2
Pause
Return to Charge
Note: The robot’s Control Panel stops glowing after the robot is
paused for a few minutes. Press the AUTO Mode Button on DEEBOT
to wake up the robot.
* When Auto-Empty Station is connected to power, DEEBOT
automatically returns to the station to charge and empty the Dust
Bin as it needs.
3
To Next Page
Loading...
