ECOVACS WINBOT 920 - Maintenance; Cleaning Pad

10
EN
Note: Wash with mild detergent.
Do NOT use a wet Cleaning Pad on WINBOT or it may slip on the window.
Washing the Cleaning Pad regularly can extend its service life.
If the Cleaning Pad becomes worn or no longer fits exactly within the fastener area, replace it with a new one to achieve optimal cleaning performance.
Explore more accessories at https://www.ecovacs.com/global.
Maintenance
Cleaning Pad
Replace the Cleaning Pad
Washing Cleaning Pad
Remove the dirty Cleaning Pad from the WINBOT and place a clean new one on it. Please make sure the cleaning pad is correctly attached,
and do not cover the Edge Detection Sensors.
Note: The gray microfiber side faces out.
A
B
A>B
A
B