8
EN
Wipe the area for WINBOT to safety attach to.
Place WINBOT on the window at least 10cm (4”) from window corners
or other obstacles.
Note: Keep objects away from WINBOT’s Fan to avoid blockage.
It is recommended to use WINBOT with WINBOT Cleaning Solution
from ECOVACS. Using tap water or other cleaners could have an
adverse effect on cleaning performance. Using other cleaning solutions
could potentially void the warranty.
Spray Cleaning Solution
Wipe the Bottom of WINBOT with a Dry Cloth
Wipe the Area for WINBOT to Attach to
Note: Do not over-spray Cleaning Solution as doing so may cause the
driving treads to slip.
4
Start
Turn the Power Switch to "I". Attach WINBOT to the glass, and WINBOT
will start cleaning after it has attached to the window successfully.
To Next Page
Loading...
