EasyManua.ls Logo

EcoWater ECR 3502R30 User Manual

EcoWater ECR 3502R30
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER’S MANUAL
Part No. 7352953 (Rev. B 12/7/15)
Systems tested and certified by NSF International
against NSF/ANSI Standard 44 for hardness reduction
and efficiency and the reduction of barium and radium
226/228, and certified to NSF/ANSI Standard 372.
ERR 3500R20, ERR 3502R30 & ERR 3502R50 are
tested and certified by NSF International against
NSF/ANSI Standard 42 for chlorine taste and odor.
Systems tested and certified by
the Water Quality Association against CSA B483.1.
How to operate your EcoWater Systems
Water Conditioner/Refiner
EcoWater Systems
HydroLink
®
& HydroLink Plus
®
Conditioners (ECR)
Refiners (ERR)
Chloramine & Chlorine
Conditioner (ERRC)
Ù
SERIES 3500 & 3502
EcoWater Systems LLC
P.O. Box 64420, St. Paul, MN 55164-0420
www.ecowater.com
Designed, Engineered &
Assembled in the U.S.A.
Ù Model ERRC 3502R50 has not been tested or certified
by NSF International or the Water Quality Association.
Question and Answer IconNeed help?

Do you have a question about the EcoWater ECR 3502R30 and is the answer not in the manual?

EcoWater ECR 3502R30 Specifications

General IconGeneral
BrandEcoWater
ModelECR 3502R30
CategoryWater Filtration Systems
LanguageEnglish

Summary

Introduction and Safety Information

Product Series and Certifications

Details the EcoWater Systems Series 3500 & 3502 models and their certifications.

General Safety Precautions

Essential safety instructions for operating the conditioner/refiner.

Regulatory Compliance and Disposal

Information on FCC, Industry Canada, and WEEE disposal requirements.

Warranty and Guarantees

Limited Warranty Details

Coverage, duration, and terms of the EcoWater Systems limited warranty.

Crest of Excellence Guarantee

Details the EcoWater Systems performance guarantee for product satisfaction.

Installation Procedures

Planning, Unpacking, and Requirements

Guidance on planning installation, unpacking, and essential requirements.

Connecting Plumbing and Electrical Systems

Instructions for connecting plumbing, electrical, and initial system startup.

System Testing, Programming, and Sanitization

Procedures for pressure testing, controller programming, and sanitizing the unit.

Wi-Fi System Setup and Registration

Wi-Fi Setup Wizard

Step-by-step guide for connecting the system to a wireless network.

System Registration and Account Management

Procedures for registering the system online and managing user accounts.

Remote Operation (Non-Wi-Fi Systems)

Non-Wi-Fi System Setup

Wizard screens for setting up non-Wi-Fi systems.

Remote Unpacking, Connection, and Navigation

Instructions for remote setup, connection, and basic menu navigation.

Remote Operation Settings and Features

Adjusting remote language, signal strength, and managing features.

Conditioner/Refiner Operation

Remote Control of Operations

Using the remote to manage recharges, set times, and view data.

System Parameter Settings

Configuring salt level, type, low salt alarm, and hardness settings.

Display Customization and Unit Settings

Modifying status screens, language, time, volume, and hardness units.

System Information and Special Features

Accessing system data, cycle times, and special feature configurations.

Troubleshooting and Service Features

Using service reminders, EASE messages, and diagnostics for support.

Service and Maintenance

Salt Handling and Brine Tank Issues

Guidance on refilling salt and resolving salt bridge problems.

Component Cleaning and Maintenance

Instructions for cleaning the nozzle, venturi, and resin bed.

Troubleshooting Guide and Diagnostics

Comprehensive guide for diagnosing and resolving common operational issues.

Technical Specifications and Parts

Dimensions and Wiring Diagrams

Physical dimensions, schematics, and wiring diagrams of the unit.

Model Specifications and Performance

Detailed technical specifications and performance claims for different models.

Repair Parts Identification

Illustrated lists of replacement parts for assemblies and components.

Related product manuals