To Next Page
S
smithshaneAug 9, 2025
What to do if my EcoWater Water Dispenser shows Err05?
- VVirginia RodriguezAug 9, 2025
If your EcoWater Water Dispenser displays Err05, the suggested solution is to check the Electronic Control Board (PWA).
What to do if my EcoWater Water Dispenser shows Err05?
If your EcoWater Water Dispenser displays Err05, the suggested solution is to check the Electronic Control Board (PWA).
What to do if my EcoWater Water Dispenser shows Err03?
If your EcoWater Water Dispenser displays Err03, the suggested solutions are to check the Motor, Valve Position Switch, and Wire Harness.
What to do if my EcoWater Water Dispenser shows Err01?
If your EcoWater Water Dispenser displays Err01, the suggested solutions are to check the Motor and Valve Position Switch.
What to do if my EcoWater Water Dispenser shows Err04?
If your EcoWater Water Dispenser displays Err04, the suggested solution is to check the Valve Position Switch.
General| Brand | EcoWater |
|---|---|
| Model | ETF AIV-12 |
| Category | Water Filtration Systems |
| Language | English |
Check filter for damage and missing parts upon arrival.
Guidance on selecting the best place to install the filter.
List of necessary tools, pipes, fittings, and other materials.
Visual guide for installing bypass valves.
Steps to safely shut off water and electricity.
Connecting bypass valves and tubing to the filter.
Completing inlet/outlet plumbing and drain hose setup.
Installing ground clamp and connecting electrical power.
Setting up the electronic controller with present time and recharge settings.
Guide for initiating the first recharge cycle and verifying operation.
How the filter removes iron through oxidation and media contact.
Step-by-step guide for cleaning and sanitizing the filter media.
How to set the current time on the electronic controller.
Determine and set recharge frequency based on usage and water quality.
Adjust the time of day when the filter initiates a recharge cycle.
Manually initiate a recharge cycle for increased water usage.
Temporarily disable recharges for periods of absence.
Setting the duration for the backwash phase of the recharge cycle.
Setting the duration for the aspirate phase of the recharge cycle.
How to clean the nozzle and venturi assembly for proper function.
Understanding error codes and their potential causes.
Procedures to diagnose valve operation and switch functions.
Addressing issues like iron bleed and air in lines.
Restoring controller settings to factory default values.
A table listing problems, causes, and corrections.
Diagram showing electrical connections for the controller.
Diagram showing all parts of the filter assembly.
A detailed list of filter components with part numbers.
Diagram illustrating the components of the control valve.
A comprehensive list of valve components and their part numbers.
Overview of warranty coverage, periods, and general provisions.
