Need help?Do you have a question about the EcoWater ETF AIIF10 and is the answer not in the manual?
Emphasizes adherence to installation instructions and local codes for warranty validity.
Details turning off water, installing a 3-valve bypass, and moving the filter into position.
Steps for installing bypass valves or copper tubes, ensuring proper seal and retention.
Covers assembling inlet/outlet plumbing, cold water pipe grounding, and connecting pipes.
Covers pressure testing for leaks, connecting wiring, air pump, and electrical power.
Shows the wiring diagram for the timer, transformer, relay box, solenoid, and motor.
Step-by-step guide to setting the current time using keypad controls.
Procedure to set the specific time of day for automatic filter recharges.
Instructions for configuring the filter's recharge frequency based on household size and iron levels.
Essential checks before initial operation, including bypass position, leaks, and air pump function.
Explains the backwash process, water flow, and mineral bed expansion for cleaning.
Guide to entering diagnostic mode to check valve cycle status and model code.
Steps to manually cycle the valve to check operation and diagnose potential issues.
Lists fundamental checks for time display, bypass position, connections, and hose condition.
General| Stages | 1 |
|---|---|
| Filtration Technology | Activated Carbon |
| Flow Rate | 10 gpm |
| Filter Life | 6 months |
| Connection Size | 1 inch |
| Operating Temperature | 40-100°F |
| Type | Whole House |
To Next Page