Need help?Do you have a question about the EcoWater ETF2100PF12 and is the answer not in the manual?
General| Model | ETF2100PF12 |
|---|---|
| Category | Water Filtration Systems |
| Type | Whole House Filter |
| Filter Life | 6-12 months |
| Operating Temperature | 40-100°F |
| Connection Size | 1 inch |
| Housing Material | Polypropylene |
Inspect filter and carton for damage, notify transportation company of any issues found.
Remove and discard packing materials, keep small parts on skin-pack until ready for use.
Covers warranty registration, periods for tanks, valve body, faceplate, and other parts.
Follow instructions, check codes, use correct materials, handle with care to avoid damage.
Avoid freezing, hot water, direct sun; use correct voltage and transformer for safety.
Details on mineral type, aggregate, neutralizer, carbon, and recommended amounts for filters.
Specifies water pressure, temperature, and flow rate requirements for optimal operation.
Provides physical size details and illustrations for different filter models.
Step-by-step guide to adding filter sand and mineral to the tank before assembly.
Procedure for sanitizing the filter using hypochlorite or household bleach for hygiene.
Details on pipe types, sizes, and fittings for connecting the filter's inlet and outlet.
Information on necessary drain connections and electrical outlet specifications for the unit.
Advice on proximity to water inlet, drain, electrical outlet, and clearance for servicing.
Diagram showing the recommended order of water treatment components in a system.
Guide for attaching fittings to the filter's inlet and outlet ports correctly.
Steps to safely shut off water and drain the system before proceeding with installation.
Instructions for placing the filter and connecting the main plumbing lines.
Procedures to restore ground continuity when using plastic bypass valves.
Detailed instructions for soldering, threading, or cementing pipe connections.
Guide for connecting and securing the drain hose with a required air gap.
Procedure to test the system for leaks after installation and refilling.
Steps for connecting wiring, transformer, and powering the unit for operation.
Instructions for setting the current time using the timer keypad interface.
Guide for selecting the current day of the week on the timer display.
Steps to set the desired days and time for automatic filter backwashing.
How to initiate an immediate backwash or set the filter for vacation periods.
Information on advanced settings like double backwash and power loss memory.
Procedure to verify factory set backwash and fast rinse times for the filter.
Steps to modify backwash and fast rinse durations using the timer keypad.
Explanation of sediment filters, acid neutralizers, and taste/odor filters.
Description of the filter's maintenance cycles and water flow paths.
Illustrations of water flow during service and backwash maintenance cycles.
Visual representation of the water flow during the fast rinse cycle.
Guide for measuring and adding neutralizing mineral as it dissolves over time.
Steps for replacing the activated carbon in a taste and odor filter when exhausted.
Basic checks for time display, bypass valve, connections, and drain hose.
Steps to manually cycle the filter valve to diagnose operational problems.
Troubleshooting for unfiltered water bypass and drain hose leaks.
Information on error codes, their meanings, and the system's wiring schematic.
Diagram showing all parts of the filter system with numerical key references.
Detailed list of all available replacement parts with their corresponding part numbers.
To Next Page