Need help?Do you have a question about the EcoWater ECR 3002R70 and is the answer not in the manual?
Covers safe handling, placement, plumbing, and electrical requirements during installation.
Details safe operating temperatures, sunlight avoidance, FCC compliance, and water quality restrictions.
Outlines coverage, duration, and service procedures for product defects.
Explains the Safeco Insurance Company of America bond guaranteeing EcoWater's obligations.
Describes common household water contaminants and their effects.
Details necessary plumbing connections, drain options, and electrical outlet requirements.
Instructions for installing the bypass valve and connecting copper tubing to the unit.
Steps for turning off water supply and installing a three-valve bypass system.
Guidance on measuring, cutting, and assembling inlet and outlet plumbing.
Detailed instructions for connecting plumbing using soldered copper, threaded pipe, or plastic pipe.
Procedures for electrical grounding and connecting the drain hose to the unit.
Instructions for installing the brine tank overflow hose, adding salt, and sanitizing the unit.
Steps for connecting the power transformer and initiating the first recharge cycle.
Guide to configuring the controller's model code, time, and water hardness settings.
Instructions for adjusting recharge time and performing remote monitor setup.
Guidance on restarting the water heater after the conditioning unit is installed.
Describes the different display screens and how program memory functions.
Explains the use of Salt Level, Recharge, and Tank Light keypads.
Details the audible beeper feedback and salt level warning indicator.
How to manually start a recharge cycle or schedule one for the next night and navigate the primary menu.
Explains displays for water flow, usage, soft water meter, and unit settings.
Covers remote status, sending EASE messages, and language settings.
Guide to accessing and using advanced diagnostic and configuration menus.
Details for setting the unit model and restoring factory default settings.
Explains LED indicators, battery checks, and changing the remote monitor channel.
Covers refilling salt, breaking salt bridges, cleaning resin beds, and nozzle/venturi maintenance.
Addresses issues like salty taste, wiring, and initial system checks.
Introduction to automatic diagnostics, error codes, and initial troubleshooting steps.
Detailed explanation of self-diagnostic functions and manual troubleshooting steps.
Procedure to manually advance cycles and check proper operation of the conditioner.
Addresses hard water bypass, leaks, flooded tanks, and provides a wiring diagram.
Provides physical dimensions of the unit and its salt storage capacities.
Details softening capacity, flow rates, pressure drop, and water quality limits.
Exploded view diagram and a list of parts for the conditioner assembly.
Lists part numbers for the components of the conditioner assembly.
Exploded view diagram of the valve assembly components.
Lists part numbers for the components of the valve assembly.
General| Brand | EcoWater |
|---|---|
| Model | ECR 3002R70 |
| Category | Water Filtration Systems |
| Language | English |
To Next Page