Need help?Do you have a question about the EcoWater ECR 3000R30 and is the answer not in the manual?
Process for requesting warranty service from a local dealer.
Details on extended and special product guarantees.
Understanding water hardness levels and their impact on household water.
Identifying and treating different types of iron in water.
Addressing sediment, barium, and radium in water supplies.
Visual guides for cabinet and two-tank system installations.
Essential prerequisites for successful unit installation.
Instructions for installing bypass valves and connecting inlet/outlet plumbing.
Steps for turning off water supply and grounding electrical components.
How to properly connect and route the unit's drain hose.
Procedures for installing the overflow hose and adding salt.
Steps for sanitizing the unit and connecting the power transformer.
How to start the initial recharge cycle after installation.
Setting the correct model code and current time on the controller.
Adjusting the controller to reflect the household's water hardness.
Configuring the automatic regeneration schedule.
Instructions for installing and positioning the remote monitor.
Procedure to restart the water heater after conditioner use.
Understanding normal display screens and program memory functions.
Operation and use of the faceplate controller's keypads.
Interpreting beep signals and setting the salt level indicator.
How to manually start recharge cycles (Now/Tonight).
Overview and access to main menu settings.
Detailed steps for setting the clock and water hardness.
Modifying the automatic regeneration start time and hardness.
Tracking daily and average water consumption.
Using the soft water meter and setting rolling display options.
Adjusting clock format and display units (gallons/liters, grains/PPM).
Checking remote status and sending service messages.
Entering the technician-level service menu.
Setting display language and testing remote monitor functionality.
Configuring low salt alerts and efficiency settings.
Changing the unit's model code for specific performance.
Resetting the controller to its original factory configuration.
Changing the remote monitor's channel to ensure proper communication.
Refilling salt and addressing salt bridges in the brine tank.
Procedures for cleaning the resin bed and nozzle/venturi assembly.
Understanding system self-diagnostics and error codes.
Performing manual diagnostic checks and interpreting results.
Utilizing the Electronic Automated Service Evaluation feature.
Verifying proper operation of regeneration cycles.
Addressing common problems like hard water bypass and salty taste.
Diagram of the unit's electrical wiring connections.
Fields to record model, serial, and installation dates.
Specifications for resin tank dimensions and brine tank salt storage.
Softening capacity and efficiency ratings based on salt dose.
Flow rates, pressure drops, and iron handling capabilities.
Exploded view illustrating the main conditioner components.
List of part numbers for the conditioner assembly components.
Exploded view illustrating the valve assembly components.
List of part numbers for the valve assembly components.
General| Type | Water Softener |
|---|---|
| Capacity | 30, 000 grains |
| Power Supply | 120V AC |
| Tank Material | Fiberglass |
| Resin Type | High-capacity resin |
To Next Page