Need help?Do you have a question about the EcoWater ECR 3000R20 and is the answer not in the manual?
General| Brand | EcoWater |
|---|---|
| Model | ECR 3000R20 |
| Category | Water Filtration Systems |
| Language | English |
Details the warranty coverage and duration for EcoWater Systems products.
Information about Safeco Insurance Company's bond guaranteeing EcoWater Systems' obligations.
Instructions for connecting the bypass valve or copper tubes to the unit.
Steps to safely shut off the water supply before installation.
Guidance for installing a three-valve bypass system.
Steps for connecting the water supply and outlet pipes to the unit.
Detailed instructions for connecting plumbing, including soldered copper and threaded pipe.
Procedures for connecting and routing the drain hose for regeneration discharge.
Instructions for filling the brine tank with water and salt.
Steps for sanitizing the unit after installation using bleach.
Guide for plugging in the power transformer to the electrical outlet.
Initiates a recharge cycle to draw sanitizing bleach through the unit.
Instructions for setting the water hardness level for accurate conditioning.
How to set the time for the unit's automatic regeneration cycle.
Sets the unit's efficiency mode (Auto Adjusting, High Capacity, Salt Efficient).
Allows changing the controller's model code for optimal operation.
Steps for cleaning the nozzle and venturi assembly for proper brine suction.
Basic checks to perform before troubleshooting or diagnostics.
Overview of the electronic checkout process and E.A.S.E. diagnostics.
Explains the self-diagnostic function and error codes.
Lists error codes, likely causes, and least likely causes.
Steps to enter diagnostic mode and interpret status information.
Verifies proper operation of regeneration cycles and components.
Inspects water flow into the brine tank during the fill cycle.
Verifies brine draw from the tank and checks for obstructions.
To Next Page