ECOWITT DS-102 - Software and Data Management; Software Requirements & Installation

12
4.7.3 Low Battery Condition
When the battery voltage is under proper operation requirement
the XX symbol will show on the LCD and the battery need to be
replace with new one.
5. Software
5.1 System requirements
To install the software onto your PC, the minimum requirements
are as follows:
Operating System: Windows XP, Windows Vista, windows7,
windows 8, windows 10
Internet Explorer 6.0 or above
Processor: Pentium III 500 MHz or above
Memory: at least 128MB, 256MB recommended
CD-ROM Drive
Data logger and PC must be connected by USB cable
5.2 Installation of the Software
1. Switch on your PC and insert the CD-ROM into the CD-ROM
Drive.
2. Double click “DataLogger.exe”
3. Choose the language and then install the “DataLogger.exe”
on your PC.
5.3 Basic Settings of the “USB Data logger” Software
After the “Data logger” program has been started, the following
main window will appear on the PC screen: