ECOWITT DS-102 - Button Operations

6
2.2 Wall mount
You can mount this item on a wall by using a screw (not
included)
3. Button Function
"SET" BUTTON:
 In normal display, press “SET” button to alternate the
display of time, date and logging intervals
 In normal display, press ”SET” button for 2 seconds to enter
setting mode
 In normal display, press "SET" and "+" buttons at the same
time for 5 seconds to enter Calibration mode
"+" BUTTON:
 In normal display, press “+” button to alternate the display
of Max, Min and current temperature & humidity
 In setting mode, press “+” button to increase the value of
information being set.
 In Max/Min mode, press “+” button for 2 seconds, the Max
or Min value will be reset to current reading
"-" BUTTON:
 In normal display, press “-” button for 2 seconds to clear the
history data
 In setting mode, press “-” button to decrease the value of
information being set.