13
· After the connection is successful, if you turn the speaker off and turn it
on again, it will reconnect to the last connected device automatically.
Also, a voice prompt, “Speaker on, ready to connect,” followed by,
“Your phone is connected,” will be heard.
· PRESS AND HOLD for 3 seconds to clear all pairing records.
Adjust the Master Volume
1. Press VOLUME briefly to adjust the speaker volume.
2. PRESS AND HOLD VOLUME to adjust the speaker volume
continuously (volume levels are 0 to 30).
a. Press briefly to increase one volume level. PRESS AND HOLD
to keep increasing the volume until maximum volume level
is reached.
b. Press briefly to decrease one volume level. PRESS AND HOLD
to keep decreasing the volume until minimum volume level
is reached.
Adjust the Microphone Volume
1. Press MIC VOLUME briefly to adjust the microphone volume.
2. PRESS AND HOLD MIC VOLUME to adjust the microphone
volume continuously (volume levels are 0 to 30).
a. Press briefly to increase one volume level. PRESS AND HOLD
to keep increasing the volume until maximum volume level
is reached.
b. Press briefly to decrease one volume level. PRESS AND HOLD
to keep decreasing the volume until minimum volume level
is reached.
Notes:
· This function only adjusts the external microphone input jack.
· The internal microphone used for EcoTalk (the activation of voice
assistants, such as Siri and OK Google, on your device), and phone calls
is not independently adjustable from the Master Volume.
To Next Page
Loading...
Need help?
General