Bluetooth Pairing & Your Audio
Connecting With Bluetooth:
Connect To Your Smart Device & Play Audio
When your EcoJourney is turned on, the LED Bluetooth
Status Indicator on the Front Panel will flash blue,
indicating the unit is ready to pair.
Turn on Bluetooth on your Bluetooth device (Smart
Device) and set the device in pairing mode. Available
Bluetooth connections shall appear. Select the
ECOXGEAR speaker from the list of discovered devices
on your Bluetooth device. Wait for a few seconds until
the connection is completed.
NOTE: Bluetooth connection feature is found in the
Settings section of most mobile phones and other
Bluetooth enabled devices.
When the ECOXGEAR selection is made and the
Bluetooth connection is completed, your EcoJourney
will announce: “Your phone is connected.” The Bluetooth
Status Indicator will shine blue.
Once connected, select and play your desired audio.
Pairing Mode: If the Bluetooth Status Indicator is not
flashing or if you wish to place your EcoJourney in pairing
mode, press and release the Bluetooth Button on the
Front Panel. Your EcoJourney shall announce, “Ready to
connect,” when ready to pair to a new device.
NOTE: Your EcoJourney shall sync & wirelessly pair with
most Bluetooth enabled devices. The unit remembers
the last device paired and will automatically search for
previous connections when the speaker is turned on
or when a device comes back into Bluetooth range. If
a connection is lost due to range, the speaker will look
to re-establish that connection. If Bluetooth is turned
off on your Smart Device, the EcoJourney may not
automatically look for the device.
3
RECOMMENDATION: If you are not familiar with Bluetooth
pairing for your Smartphone or other Smart Device, refer to
the User Guide for your Smartphone to learn how to add
and pair a new device (EcoJourney for instance) to your
Smartphone using Bluetooth.
Bluetooth Pairing & Connections: Once paired, should you
have an issue switching between Bluetooth connections
between devices, open the Bluetooth Section within the
device currently connected to the EcoJourney and delete
the Bluetooth connection. The EcoJourney will then be
available to pair & connect to an alternate Bluetooth enabled
Smartphone / Audio Device.
To Previous Page
Loading...
Need help?
General