Once the connection between the speakers is
successful, Speaker C (and Speaker D) will announce,
“Connection Successful,” and start playing music from
your Bluetooth device.
NOTES:
• If all the speakers are turned off, then turned on, the
speaker(s) in EcoCast Receiving Mode (Speakers B,
C, and D) will automatically re-connect to the
speaker in Transmitting Mode (Speaker A). If they
are not automatically re-connected, please follow the
above steps.
• You can also pair the EcoJourney with any other
ECOXGEAR speaker bearing the EcoCast symbol .
• The EcoCast functionality is only available while using
Bluetooth as your Audio Source at a maximum range of
30 feet between speakers.
• While connecting the EcoJourney speakers, make sure
that the speakers are within a few feet of each other.
3
Master Power Switch
EcoJourney has a separate
Master Power Switch and
a Standby Button. The
switch MUST be set to
the ON position to power
your EcoJourney. Once the
switch is set to ON, use the
Standby Button located on
the Front Panel to turn the
unit on or off.
NOTE: When not in use for
extended periods, turn the
Master Power off to preserve
battery life.
IMPORTANT: Standby Power
function will NOT operate
when the Master Power is set
to OFF.
Inside Panel: Functions
USB-C Input
Connect the USB cable to the
5V USB-C Input to charge
your EcoJourney.
RECOMMENDATION: Use
the USB cable and power
adapter included in the box.
NOTE: Charge time
from low to full charge is
approximately 10-12 hours.
While playing audio,
EcoJourney can be charged.
CAUTION: Do NOT charge if
unit and/or connections are
wet or damp.
USB Output
USB-C Input
Master Power Switch
Audio AUX-IN
Inside Panel
To Next Page
Loading...
Need help?
General