ECS 945GCT-D - PC Health Status

33
Using BIOS
Init Display First (PCI Card)
Use this item to select which graphics controller to use as the primary boot devices.
Press <Esc> to return to the main menu setting page.
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PC Health Status
-=-System Hardware Monitor-=-
Shutdown Temperature Disabled
CPU Temperature 54°C/129°F
CPU VCore 1.128 V
VDIMM 1.904 V
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults
F1: General Help
Disabled
70°C/158°F
75°C/167°F
80°C/176°F
System Component Characteristics
These items display the monitoring of the overall inboard hardware health events,
such as System & CPU temperature, CPU & DIMM voltage, CPU & system fan
speed,...etc.
• CPU Temperature
• CPU VCore
• VDIMM
Press <Esc> to return to the main menu setting page.
Shutdown Temperature (Disabled)
Enable you to set the maximum temperature the system can reach before powering
down.