ECS A68M-C4DL - Connecting Case Components

Chapter 2
20
A68M-C4DL USER MANUAL
1 & 5. CPU_FAN (CPU cooling FAN Connector) & SYS_FAN (System Cooling FAN
Connector)
After you have installed the motherboard into a case, you can begin connecting the
motherboard components. Refer to the following:
Connect the CPU cooling fan cable to CPU_FAN.
Connect the system cooling fan connector to SYS_FAN.
Users please note that the fan connector supports the CPU cooling fan of 1.1A
at +12V.
2-4-7. Connecting Case Components
No. Components No. Components
1 CPU_FAN 4 F_PANEL
2SPK5SYS_FAN
3 ATX_POWER 6 ATX_12V