45
Using BIOS
• FAN1 START PWM VALUE: This item is used to set the start PWM
value of the smart fan.
• FAN1 START Temp
o
C: This item is used to set the start temperature of
the smart fan.
• FAN1 Limit Temp
o
C: This item is used to set the limit temperature of
the smart fan.
• FAN1 Slope Select PWM/
o
C: This item is used to set the Slope Select
PWM of the smart fan.
System Component Characteristics
These fields provide you with information about the systems current operating status.
You cannot make changes to these fields.
• CPU Tcontrol
• System Temperature
• CPU Fan Speed
• System Fan Speed
• CPU Vcore
• VDIMM
Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before powering down.
Warning Temperature (Disabled)
This item enables or disables the warning temperature function.
Press <Esc> to return to the PC Health Status page.
Load Fail-Safe Defaults
This option opens a dialog box that lets you install fail-safe defaults for all appropriate
items in the Setup Utility:
Press <Y> and then <Enter> to install the defaults. Press <N> and then <Enter> to not
install the defaults. The fail-safe defaults place no great demands on the system and are
generally stable. If your system is not functioning correctly, try installing the fail-safe
defaults as a first step in getting your system working properly again. If you only want to
install fail-safe defaults for a specific option, select and display that option, and then press
<F6>.
To Next Page
Loading...
Need help?
General
