21
Using BIOS
SATA Configuration
Use this item to show the mode of serial SATA configuration options.
Serial-ATA Controller 0 (Compatible)
Use this item to select the Serial-ATA cotroller options: Disabled, Compatible, En-
hanced.
SATA Mode (IDE Mode)
Use this item to select SATA mode.
SATA Configuration
SATA Mode [IDE Mode]
Serial-ATA Controller 0 [Compatible]
SATA Port1 :
SlimtypeDVD A ATAPI
SATA Port2 :
ST3500418AS (500.1GB)
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
(1) IDE Mode. (2) AHCI Mode.
Main Advanced Chipset Boot Security Save & Exit
SATA Port 1~2 (Not Present)
This motherboard supports two SATA channel and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
Press <Esc> to return to the Advanced Menu page.
F1:General Help
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
To Next Page
Loading...
Need help?
General
