26
Using BIOS
This page enables you to set the keyboard NumLock state.
Boot Menu
Boot Configuration
This item shows the information of the boot configuration.
Quiet Boot (Disabled)
This item enables or disables quiet boot.
Setup Prompt Timeout (1)
This item is used to set the number of seconds to wait for setup activation key.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Enabled/Disabled Quiet Boot
option
Main Advanced Chipset Boot Security Save & Exit
Boot Configuration
Quiet Boot [Disabled]
Setup Prompt Timeout 1
CSM16 Module Version 07.64
GateA20 Active [Upon Request]
Option ROM Messages [Force BIOS]
Interrupt 19 Capture [Enabled]
Set Boot Prioritiy
1st Boot [CD/DVD: SlimtypeDV ...]
2nd Boot [Hard Disk: ST35004 ...]
3rd Boot [USB Floppy]
4th Boot [USB CD/DVD]
5th Boot [USB Hard Disk]
6th Boot [USB KEY: U3 Innosto ...]
7th Boot [Network]
8th Boot [UEFI: USB USB Hard ...]
CD/DVD ROM Drive BBS Priorities
Hard Disk Drive BBS Priorities
USB KEY Drive BBS Priorities
UEFI Boot Drive BBS Priorities
CSM16 Module Version (07.64)
This item shows the information of the CSM16 Module Version.
F1:General Help
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
f
f
f
f
GateA20 Active (Upon Request)
This item can be set to Upon request or Always. When it is upon request, GA20 can
be disabled using BIOS services. When it is Always, do not allow disabling GA20, this
option is useful when any RT code is executed above 1MB.
Option ROM Messages (Force BIOS)
This item is used to set display mode for option ROM.
Interrupt 19 Capture (Enabled)
This item enables or disables option ROMs to trap Int 19.
Set Boot Priority
This item enables you to select boot priority for all boot devices.
To Next Page
Loading...
Need help?
General
