22
Using BIOS
USB Configuration
Scroll to this item and press <Enter> to view the following screen:
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Audio
allows the system to detect the presence of the USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
USB Configuration
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.11.1210. Copyright (C) 2011, American Megatrends, Inc.
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. Disabled option
will keep USB devices
available only for EFI
applications.
Legacy USB Support [Enabled]
Main
Advanced Chipset Boot Security Save & Exit
Press <Esc> to return to the Advanced Menu page.
F1:General Help
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
To Next Page
Loading...
Need help?
General
