26
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
Standard CMOS Setup
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
f
f
f
f
Date (www mm:dd:yy) Mon 11/22/2010
Time (hh:mm:ss) 21:17 :03
SATA1 Hard Disk
SATA2 Not Detected
SATA3 ATAPI CDROM
SATA4 Not Detected
IDE BusMaster Enabled
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
SATA1~4
f
This motherboard supports four SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
IDE BusMaster (Enabled)
This item enables or disables the DMA under DOS mode. We recommend you to leave
this item at the default value.
Press <Esc> to return to the main menu setting page.
To Next Page
Loading...
Need help?
General
