36
Using BIOS
System Component Characteristics
These items display the monitoring of the overall inboard hardware health events,
such as System & CPU temperature, CPU & DIMM voltage, CPU & system fan
speed,...etc.
• CPU Temperature
• CPU Fan Speed
• CPU Vcore
• VDIMM
Press <Esc> to return to the main menu setting page.
Case Open Warning (Disabled)
This item enables or disables the warning if the case is opened up, and the item below
indicates the current status of the case.
Chassis Opened (No)
This item indicates whether the case has been opened.
Smart Fan start PWM value (5)
This item is used to set the start PWM value of the smart fan.
Smart Fan start TEMP. (°C) (70)
This item is used to set the start temperature of the smart fan.
DeltaT (+3)
This item specifies the range that controls CPU temperature and keeps it from going
so high or so low when smart fan works.
Smart Fan Slope PWM value (12 PWM value/°C)
This item is used to set the Slope Select PWM of the smart fan.
CPU FAN Full Limit Temp. (80°C)
This item is used to set the limit temperature of the smart fan.
Press <Esc> to return to the PC Health Status page.
Shutdown Temperature (Disabled)
This item enables or disables you to set the maximum temperature the CPU can
reach before powering down.
To Next Page
Loading...
