Setting Up eJIFFY
51
3. Press <DEL> or click the BIOS Setup button on the post screen to enter the BIOS
setup page after boot up.
4. And then enter the Advanced Setup page to enable the item ECS eJIFFY Func-
tion. Press F10 to save the configuration and exit. Restart your computer.
2. Please refer to ECS website for new eJIFFY application updates.
1. eJIFFY is available in SATA/IDE/AHCI mode. It does not support RAID
configuration and the onboard 34-pin floppy drives.
Note:
To Next Page
Loading...
