44
Using BIOS
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Smart Fan Function
Help Item
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Load Default Settings
F1:General Help
: Move
mnlk
Options
Press <Esc> to return to the Smart Fan Mode page.
CPU Smart Fan Function Enabled
SMART Fan Mode Manual
SMART Fan start PWM value 5
CPU DeltaT +3
SMART Fan start TEMP. (°C) 70
SMART Fan Slope PWM value 12 PWM value/°C
CPU FAN Full Limit Temp 80°C
SYSTEM Smart Fan Function Enabled
SMART Fan2 start PWM value 52
System DeltaT +3
SMART Fan2 start TEMP. (°C) 60
SMART Fan2 Slope PWM value 4 PWM value/°C
System FAN Full Limit Temp 79°C
SMART Fan/Fan2 Slope PWM value (5 PWM value/°C)
This item is used to set the Slope Select PWM of the smart fan.
This item is used to set the limit temperature of the smart fan.
CPU FAN Full Limit Temp (63°C)
SMART Fan/Fan2 start PWM value (28/52)
This item is used to set the start PWM value of the smart fan.
CPU DeltaT1 (+3)
This item specifies the range that controls CPU temperature and keeps it from going
so high or so low when smart fan works.
SMART Fan/Fan2 start TEMP. (°C) (43/60)
This item is used to set the start temperature of the smart fan.
SYSTEM Smart Fan Function (Enabled)
This item is used to enable or disable the system fan function.
SYSTEM Smart Fan Function (Enabled)
This item is used to enable or disable the system fan function.
System DeltaT1 (+3)
This item specifies the range that controls CPU temperature and keeps it from going
so high or so low when smart fan works.
System FAN Full Limit Temp (79°C)
This item is used to set the limit temperature of the system fan.
To Next Page
Loading...
Need help?
General
