ECS H61H2-M6 - Chapter 3: Using BIOS; Parallel Port Configuration

41
Using BIOS
fParallel Port Configuration
Scroll to this item and press <Enter> to view the following screen:
Parallel Port (Enabled)
This item allows you to enable or disable parallel port.
Device Settings (IO=378h; IRQ=5)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Parallel Port Configuration
Parallel Port [Enabled]
Device Settings IO=378h; IRQ=5
Enable or Disable Parallel
Port (LPT/LPTE)
Change Settings [Auto]
Device Mode [Standard Parallel...]
F1:General Help
+/- : Change Opt.
Enter : Select
lk
mn
:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Press <Esc> to return to the Super IO Configuration page.
Press <Esc> to return to the Advanced Menu page.
Device Mode (Standard Parallel...)
Use this item to select device mode.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.
Main
Advanced Chipset M.I.B III Boot Security Exit