ECS H77H2-M User Manual

Chapter 3
H77H2-M USER MANUAL
53
When end-users encounter failure after attempting over-clocking, please take the
following steps to recover from it.
1. Shut down the computer.
2. Press and hold the “Page Up Key (PgUp)” of the keyboard, and then boot the PC
up.
3. Two seconds after the PC boots up, release the “Page Up Key (PgUp)”.
4. The BIOS returns to the default setting by itself.
Fail-Safe Procedures for Over-clocking

ECS H77H2-M Specifications

General

Brand	ECS
Model	H77H2-M
Category	Motherboard
Language	English